Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

dot1x and Guest VLAN

Hi everybody,

I have a 2960 switch that is configured for dot1x.

The users who are member of PEAP group can connect to network but other users (guest users) who are member of our domain but they are not member of PEAP group can not connect and the port is not connected.

Would you please advise me in this issue?

1 REPLY

Re: dot1x and Guest VLAN

hi,

When you configure a guest VLAN, clients that are not IEEE 802.1x-capable are put into the guest VLAN when the server does not receive a response to its EAP request/identity frame. Clients that are IEEE 802.1x-capable but that fail authentication are not granted network access. The switch supports guest VLANs in single-host or multiple-hosts mode.

for ready refference

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_37_ey/configuration/guide/sw8021x.html

HTH,

regards,

shri :)

582
Views
0
Helpful
1
Replies