Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

dot1x authentication on cisco switch

Hi can anyone help me to configure to use dot1x authentication method for my cisco 2960 switch.

I am trying to use microsoft IAS as a radius server.

i configured certificate cervices also and clients & computers are getting certificates.

i configured also my switch to use dot1x authentication as

aaa new-model

aaa authentication dot1x default group radius

interface f0/1

switchport mode access

dot1x system-auth-control

radius-server host 10.0.0.110 auth-port 1645 acct-port 1646 key ****

interface f0/1

dot1x port-control auto

but still my computer cannot connect to the switch

i debug dot1x all

and i got the result which i have attached with this message.

1 REPLY
Silver

Re: dot1x authentication on cisco switch

Go through this Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide, 12.1(19)EA1. Configuring 802.1X Port-Based Authentication

http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_19_ea1/configuration/guide/Sw8021x.html

152
Views
4
Helpful
1
Replies
CreatePlease to create content