05-17-2007 11:45 AM - edited 03-05-2019 04:08 PM
I have a W6K-SUP2 card delivered to me with native code. I need to downgrade that back to hybrid, since that is what we still use. I can't seem to find any docs about how to do that.
Can anyone point me in the right direction?
Solved! Go to Solution.
05-17-2007 02:01 PM
Hi,
Kindly check this out:
System Software Conversion from Cisco IOS (Native) to CatOS (Hybrid) for Catalyst 6500/6000 Switches
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801350b8.shtml
HTH, please do rate all helpful replies,
Mohammed Mahmoud.
05-17-2007 02:01 PM
Hi,
Kindly check this out:
System Software Conversion from Cisco IOS (Native) to CatOS (Hybrid) for Catalyst 6500/6000 Switches
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801350b8.shtml
HTH, please do rate all helpful replies,
Mohammed Mahmoud.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide