07-21-2009 08:36 AM - edited 03-06-2019 06:53 AM
Hello, I have set up configured NTP in my LAN network, in the clien switches I have the following commands:
ntp logging
ntp clock-period 36028792
ntp peer 10.213.20.4
now This synchronized and the peer is well associated, the clock configured,but when digit "show logging" the outcome don't show the time correctly.
this is the show:
2d17h: %LINK-3-UPDOWN: Interface FastEthernet0/30, changed state to up
2d17h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/30, changed state to up
like that when I type "show logging" show correct time:
Jul 21 11:21:44.770 COL: %LINK-3-UPDOWN: Interface FastEthernet0/30, changed state to up
Jul 21 11:21:45.776 COL: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/30, changed state to up
Solved! Go to Solution.
07-21-2009 08:43 AM
From what I understand the first "show logging" output is what you see from your switches, but you want to see it like the second output you provided.
Try adding this into your configuration.
!
service timestamps log datetime localtime
service timestamps debug datetime localtime
07-21-2009 08:43 AM
From what I understand the first "show logging" output is what you see from your switches, but you want to see it like the second output you provided.
Try adding this into your configuration.
!
service timestamps log datetime localtime
service timestamps debug datetime localtime
07-21-2009 09:02 AM
Thanks Medan, was exactly what I needed
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: