Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Dual isp failover nat problem not able to get outside from lan

So basically I'm installing this new 3845 router.  

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Dual isp failover nat problem not able to get outside from lan

Hi,

Your NAT config is correct. Can you specify the route to secondary ISP as a backup route by setting a higher AD so all traffic is sent to the primary ISP to test.:

ip route 0.0.0.0 0.0.0.0 192.168.1.1  10

Now ping 8.8.8.8 from a host in your LAN and post output of sh ip nat translations, if it is empty then  verify you can ping 8.8.8.8 from the router and tell us what happens.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
2 REPLIES
Purple

Dual isp failover nat problem not able to get outside from lan

Hi,

Your NAT config is correct. Can you specify the route to secondary ISP as a backup route by setting a higher AD so all traffic is sent to the primary ISP to test.:

ip route 0.0.0.0 0.0.0.0 192.168.1.1  10

Now ping 8.8.8.8 from a host in your LAN and post output of sh ip nat translations, if it is empty then  verify you can ping 8.8.8.8 from the router and tell us what happens.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
New Member

Dual isp failover nat problem not able to get outside from lan

Good eye Alain.  This indeed fixed my issues.   I changed to ip route 0.0.0.0 0.0.0.0 192.168.1.1 10 set up dhcp and my users are online.   Thanks for all your help.

325
Views
0
Helpful
2
Replies