03-31-2017 03:22 PM - edited 03-08-2019 10:00 AM
Hi everyone,
I have an odd issue -
Everytime I write memory on my 6509E with dual SUP2T-10G supervisors, the standby SUP reloads.
I upgraded IOS code on both bootdisk and slaveboot disk to the same version prior to doing more tests.
I consoled into the standby SUP to see what happens when write memory is issue, and this is what is displayed:
validate_header: Invalid Checksum: 651C, nfh->checksum: D6CC
validate_header: Invalid Checksum: 651C, nfh->checksum: D6CC
validate_header: Invalid Checksum: 651C, nfh->checksum: D6CC
validate_header: Invalid Checksum: 651C, nfh->checksum: D6CC
validate_header: Invalid Checksum: 651C, nfh->checksum: D6CC
validate_header: Invalid Checksum: 651C, nfh->checksum: D6CC
validate_header: Invalid Checksum: 651C, nfh->checksum: D6CC
validate_header: Invalid Checksum: 651C, nfh->checksum: D6CC
validate_header: Invalid Checksum: 651C, nfh->checksum: D6CC
validate_header: Invalid Checksum: 651C, nfh->checksum: D6CC
validate_header: Invalid Checksum: 651C, nfh->checksum: D6CC
System Bootstrap, Version 12.2(50r)SYS2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2011 by cisco Systems, Inc.
PYRAMID platform with 2097152 Kbytes of main memory
Autoboot executing command: "boot bootdisk:s2t54-ipservicesk9-mz.SPA.152-1.SY3.bin"
bootdisk:%s72044-atafslib-m: Digitally Signed Release Software with key version A
Initializing ATA monitor library...
bootdisk:s2t54-ipservicesk9-mz.SPA.152-1.SY3.bin: Digitally Signed Release Software with key version A
Self extracting the image... [OK]
Self decompressing the image : ########################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################### [OK]
*** No sreloc section
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, s2t54 Software (s2t54-IPSERVICESK9-M), Version 15.2(1)SY3, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Sat 01-Oct-16 03:06 by prod_rel_team
validate_header: Invalid Checksum: 651C, nfh->checksum: D6CC
This is a VSS capable switch.
VSL ports can be configured in slot: 6
03-31-2017 07:42 PM
Hi,
It appeared to be a hardware issue as it behaves the same with different software versions. I would open a ticket with TAC and ask them to replace the backup sup.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide