07-09-2007 01:15 PM - edited 03-05-2019 05:12 PM
have a GIGE interface that will only come Up/Up at HALF duplex on a 2821. is there a known IOS issue on this ?
the other end is an ASA5010 -- IOS 7.2.1
when we set the ASA to FULL and the MR to FULL = up/dn on MR.
2821 ios is: 12.4(13r)T
07-13-2007 01:48 PM
This issue can be solved by making the duplex and speed as Auto.
07-13-2007 08:59 PM
Hi
Check for cabling issues as gig requires all the 4 pairs.What is the interface on ASA is it also a gig interface.
Thanks
Mahmood
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide