Can anyone help me understand if it is possible to have NAT pools that NAT Inside Local addresses to Inside Global addresses, plus static entries that NAT static Inside Local addresses to a static Inside Global addresses?
I have a app server on a clients network that requires my private addressing to be natted to their private addressing. This is done via a NAT pool. At the same time i have another app server on the same clients network that requires a static 1-2-1 NAT entry as it has to initiate a connection back into the host.
My issue is that the static entry seems to work but it breaks the dynamic NAT as the host is always getting natted to the static address for the 2nd app server, rather than use the pool.
10.10.2.0 - is the customers addresses that we NAT to/behind.
The customer then allows their address range 10.10.2.0 connections to their FTP/App servers which are
The problem i have is that i need to have a static 1-2-1 host NAT entry to get a call recording solution to work (Witness). But with this static 1-2-1 entry i also need the host to access the FTP/App servers which have NAT pools. I cant get the host to use the pools if i define the static 1-2-1?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...