Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

dynamips help

is any body suggest me, what router ios will support for switching like rstp stp n glbp. to use in dynamips emulator

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Bronze

Re: dynamips help

My Dynamips:

Rack1SW1#sh ver | i IOS

Cisco IOS Software, 3600 Software (C3640-IK9S-M), Version 12.4(17), RELEASE SOFTWARE (fc1)

Rack1SW1#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Rack1SW1(config)#spanning-tree ?

backbonefast Enable BackboneFast Feature

portfast Spanning tree portfast options

uplinkfast Enable UplinkFast Feature

vlan VLAN Switch Spanning Tree

Rack1SW1(config)#spanning-tree

As you see, I have uplinkfast and backbonefast available.

Can I change the mode to RSTP? No.

But I have the features available that makes up RSTP.

BTW, you are only available to run CST (Common Spanning Tree) on Dynamips not PVST nor RPVST.

HTH,

__

Edison.

Hall of Fame Super Bronze

Re: dynamips help

In my CCNP days, there was no such thing as dynamips so I can't really offer much guidance as to the extend of help this product can provide.

However, I must say, it should help you around 80% to 85% of the general task. The 15% to 20% is mostly due to switching but you should be able to perform 100% of routing tasks.

For switching task which you can't do in dynamips, I recommend renting a rack for a day or two. They are quite cheap. Just google for 'CCIE Rental Racks'.

HTH,

__

Edison.

8 REPLIES

Re: dynamips help

None, it does not emulate switches.

New Member

Re: dynamips help

i know dynamips will not emulate switches but when we include 16 port eth. card it will, now i want 2 know witch ios (router) will support max commands of switching lab i.e. 3550,3560 switch commands.i think u hav an idea which searis of routers dynamips supports,becoz i want to practice ccnp bcmsn lab on dynamips.ok

thank u for ur reply

Re: dynamips help

This is a forum where most of the dynamips Que can be ans.

Check the topic below.

http://7200emu.hacki.at/viewtopic.php?t=5276

Let me know if it does help you

New Member

Re: dynamips help

thank u pravin,

i know that forum i already checked it but unfortunatly i did not get 100 % result..

any how thank u once again plz keep in touch

madan

Hall of Fame Super Bronze

Re: dynamips help

My Dynamips:

Rack1SW1#sh ver | i IOS

Cisco IOS Software, 3600 Software (C3640-IK9S-M), Version 12.4(17), RELEASE SOFTWARE (fc1)

Rack1SW1#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Rack1SW1(config)#spanning-tree ?

backbonefast Enable BackboneFast Feature

portfast Spanning tree portfast options

uplinkfast Enable UplinkFast Feature

vlan VLAN Switch Spanning Tree

Rack1SW1(config)#spanning-tree

As you see, I have uplinkfast and backbonefast available.

Can I change the mode to RSTP? No.

But I have the features available that makes up RSTP.

BTW, you are only available to run CST (Common Spanning Tree) on Dynamips not PVST nor RPVST.

HTH,

__

Edison.

New Member

Re: dynamips help

hai Edison,

thank u very much 4 ur reply.1 more ?.for my ccnp preparation how much dynamips will help me.am i able to run r test all the labs whitch is in ccnp i.e. bsci, bcmsn,iscw and ont.

thank u

madan

Hall of Fame Super Bronze

Re: dynamips help

In my CCNP days, there was no such thing as dynamips so I can't really offer much guidance as to the extend of help this product can provide.

However, I must say, it should help you around 80% to 85% of the general task. The 15% to 20% is mostly due to switching but you should be able to perform 100% of routing tasks.

For switching task which you can't do in dynamips, I recommend renting a rack for a day or two. They are quite cheap. Just google for 'CCIE Rental Racks'.

HTH,

__

Edison.

New Member

Re: dynamips help

hai

thank u very much my friend

madan

177
Views
0
Helpful
8
Replies