Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

edge distribution / enterprise edge models

Hi all

Can you tell me what the majority use for your edge distribution model and enterprise WAN model

We have a a campus core which should connect to the edge,

would you typically go from core, to a firewall, then to a mulitlayer switch or ASR router, then this would connect your internet / WAN models etc ?

1 ACCEPTED SOLUTION

Accepted Solutions

edge distribution / enterprise edge models

Hi Carl,

That is what good and as per best practice.

So that your ASR routers facing your provider switches at perimeter.
And your ASA outside interface will connect to your ASR and inside interface to your core switch

Please rate the helpfull posts.
Regards,
Naidu.

4 REPLIES

edge distribution / enterprise edge models

Hi Carl,

I would like and hoping as best practice like this...

1. ASR routing facing the internet/WAN
2. Your Firewall connect to your ASR router.
3. Firewall connect to your Core or multi layer switch.

Please rate the helpfull posts.
Regards,
Naidu.

New Member

edge distribution / enterprise edge models

hi there

My idea, would be

Core connects to ASA firewall

outside interface connects to vlan on 2 x ASR routers running HSRP

ASR router then connects to third party WAN switches,  Internet firewall, VPN module etc

this sound good ?

edge distribution / enterprise edge models

Hi Carl,

That is what good and as per best practice.

So that your ASR routers facing your provider switches at perimeter.
And your ASA outside interface will connect to your ASR and inside interface to your core switch

Please rate the helpfull posts.
Regards,
Naidu.

New Member

Re: edge distribution / enterprise edge models

replace Asa with juniper

Sent from Cisco Technical Support iPhone App

605
Views
0
Helpful
4
Replies
CreatePlease to create content