Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ehwic on cisco 2811

Hello Expert,

Can ehwic be use on cisco 2811?

I know this can be use on cisco 2901 routers

Regards

Jomo

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: ehwic on cisco 2811

Hello Jomo,

Not expert but I will try to answer :

1/ From this page  http://www.cisco.com/en/US/prod/collateral/modules/ps5949/qa_c67-612908.html

Q. Are there any restrictions or considerations I should be aware of?
A Yes, Following is a summary of a few limitations when using the EHWIC switch:

• The EHWIC switch is not supported on older ISR platforms (Cisco 1841 and Cisco 2800 and 3800 Series).

############""

2/ http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/geSwitchEhwic_hw.pdf says :

Cheers!

Karim

1 REPLY
Silver

Re: ehwic on cisco 2811

Hello Jomo,

Not expert but I will try to answer :

1/ From this page  http://www.cisco.com/en/US/prod/collateral/modules/ps5949/qa_c67-612908.html

Q. Are there any restrictions or considerations I should be aware of?
A Yes, Following is a summary of a few limitations when using the EHWIC switch:

• The EHWIC switch is not supported on older ISR platforms (Cisco 1841 and Cisco 2800 and 3800 Series).

############""

2/ http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/geSwitchEhwic_hw.pdf says :

Cheers!

Karim

1267
Views
0
Helpful
1
Replies
CreatePlease login to create content