There are quite a few things to look at. First, the error that you're getting is generally an indication that you're trying to peer on secondary addresses or addresses that are on different subnets. How are these routers laid?
Here's what I see at first glance. Your S0/0 interface is 10.0.1.6/29, which means it's on the 10.0.1.0/29 network. Your other addresses fall into the 10.0.1.8/29 network which allows for 10.0.1.9 - 10.0.1.14 useable address. If you'll change your S0/0 interface to something in that range, your peering should come up on that interface. As far as the other error, it's hard to tell where it's connecting. Can you post a diagram?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.