Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

EIGRP Advertising Routes

Is this possible.

What I'm wanting to achieve is to route traffic to two hosts via a one link but the rest of the subnet via a different link.

My plan is to advertise the specific host addresses through eigrp on router 1. Static routes on the other side would return the traffic from these two hosts.

On my other router I would have a static route to the subnet which points to a different hop and would be redistributed into EIGRP.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: EIGRP Advertising Routes

Darren

Yes that would work as the most specific route is always used.

You could also use PBR if you wanted to.

Jon

1 REPLY
Hall of Fame Super Blue

Re: EIGRP Advertising Routes

Darren

Yes that would work as the most specific route is always used.

You could also use PBR if you wanted to.

Jon

242
Views
0
Helpful
1
Replies
CreatePlease to create content