Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

EIGRP summarization

Hi,

I have got some issue to be solved in the below mentioned EIGRP topology.

Topology: Lan1==>R1==>R2==>R3==>Lan2

R1(ethernet-0)1.129.0.0/10

R1(serial-0)=1.65.0.0/10

R2(serial-0)=1.66.0.0/10

R2(serial-1)=2.0.0.1/8

R3(serial-0)=2.0.0.2/8

I have enable no auto-summarization command in the beggining in all 3 routers and in R1 i have advertised only 1.64.0.0/10 network but, in the R2's routing table along with 1.64.0.0 n/w 1.128.0.0/10(which is ethernet n/w address of R1) could also be seen even without being advertised that 1.128.0.0/10 n/w in R1.

So, plz suggest...

Thank you.

Prado

1 REPLY
Hall of Fame Super Blue

Re: EIGRP summarization

Prado

Please post configs of all 3 routers.

Jon

90
Views
0
Helpful
1
Replies