Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Ekey Errors on cisco blade switch 3020

Anyone know what this error mean and how can this be stopped?

Dec 9 16:47:32.317: %PM-4-ERR_DISABLE: ekey error detected on Gi0/8, putting Gi0/8 in err-disable state

1 REPLY
New Member

Re: Ekey Errors on cisco blade switch 3020

Hello,

I recently put some of these in the other week and have the same error messages. All I could find was a reference to use the Onboard Administrator to resolve the issue. Since I do not manage the server aspect of these, the ports are still in that state.

If the Onboard Administrator detects a physical problem between the blade server and the switch, the

Onboard Administrator changes these interfaces to the EKEY error-disabled state. You must use the Onboard

Administrator to find the root cause of the problem, and to recover from the error-disabled state. See the

HP BladeSystem documentation at http://www.hp.com/go/bladesystem/documentation for more

information.

http://www.cisco.com/en/US/docs/switches/blades/3020/software/release/12.2_25_sef1/configuration/guide/3020scg.html

3579
Views
5
Helpful
1
Replies