07-13-2012 08:25 AM - edited 03-07-2019 07:45 AM
Can someone help me please? I have EEM configured on cisco 3560 switch. The configuration is below. I want that switch inform me through email when device with particilular IP address become unavailable. For some reason this configuration is not good and I can't tell why. I already try to debug this with debug event manager action mail but didn't see any output .
ip sla 11
icmp-echo ip address
frequency 20
ip sla schedule 11 life forever start-time now
event manager applet device-TEST
event snmp oid 1.3.6.1.4.1.9.9.42.1.2.9.1.6.11 get-type exact entry-op lt entry-val "2" poll-interval 20
trigger occurs 5 period 120
action 02.0 mail server "ip address" to "mail@gmail.com" from "device@gmail.com" subject "device is down"
07-13-2012 08:33 AM
The mail part looks good, I'm not sure you are hitting the trigger right.
Why not do a track on the ip sla instead of the snmp stuff?
Here's a good example of that.
https://learningnetwork.cisco.com/blogs/network-sheriff/2009/06/19/writing-your-first-eem-applet
07-16-2012 12:42 AM
Hi,
Event track is not supported in configuration of EEM on 3560 switch.
08-05-2014 03:53 AM
Hey
How do I go about tracking an IP SLA on the 3560 when you say event track is not supported? :)
Why is it not supported?
Best regards
Jesper
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: