Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Embeded Event Manager on cisco 3560 switch

Can someone help me please? I have EEM configured on cisco 3560 switch. The configuration is below. I want that switch inform me through email when device with particilular IP address become unavailable. For some reason this configuration is not good and I can't tell why. I already try to debug this with debug event manager action mail but didn't see any output .

ip sla 11

icmp-echo ip address

frequency 20

ip sla schedule 11 life forever start-time now

event manager applet device-TEST

event snmp oid get-type exact entry-op lt entry-val "2" poll-interval 20

trigger occurs 5 period 120

action 02.0 mail server "ip address" to "" from "" subject "device is down"

New Member

Embeded Event Manager on cisco 3560 switch

The mail part looks good, I'm not sure you are hitting the trigger right.

Why not do a track on the ip sla instead of the snmp stuff?

Here's a good example of that.

New Member

Embeded Event Manager on cisco 3560 switch


Event track is not supported in configuration of EEM on 3560 switch.

New Member

HeyHow do I go about tracking


How do I go about tracking an IP SLA on the 3560 when you say event track is not supported? :)
Why is it not supported?

Best regards


CreatePlease login to create content