Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Silver

enable jumbo frame on Catalyst 6513

Hi all,

If I have Ether-channel on the Catalyst 6513 and that I want to enable jumbo frame

on the ports that are belong to the

Ether- channel port-channel. Do I need to enable jumbo frame on the physical

ports itself or just the port-channel?

According to Cisco, I only need to do it

on the port-channel, is that correct?

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/configuration/guide/sw_int.html#wp1053326

1 REPLY

Re: enable jumbo frame on Catalyst 6513

You can use this feature on trunking/channeled or regular port, and on the physical port.

http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration_example09186a008010edab.shtml#intro

1086
Views
0
Helpful
1
Replies
CreatePlease to create content