Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

enable multicast on 2950/2960 series switches

How do you enable multicast traffic on 2900 series switches?

Sent from Cisco Technical Support iPhone App

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

enable multicast on 2950/2960 series switches

2950 is a layer-2 switch.  You need command

ip igmp snooping vlan vlan-id

here is the config guide:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_6_ea2c/configuration/guide/swgigmp.html

HTH

7 REPLIES

enable multicast on 2950/2960 series switches

try 'ip multicast-routing'

New Member

enable multicast on 2950/2960 series switches

routing on a layer 2 switch?

New Member

enable multicast on 2950/2960 series switches

Thanks Reza

Hall of Fame Super Gold

Re: enable multicast on 2950/2960 series switches

routing on a layer 2 switch?

2950 won't do routing.

2960, however, can.  You'll need to upgrade the switch to 12.2(55)SE3 and later.

VIP Super Bronze

enable multicast on 2950/2960 series switches

2950 is a layer-2 switch.  You need command

ip igmp snooping vlan vlan-id

here is the config guide:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_6_ea2c/configuration/guide/swgigmp.html

HTH

enable multicast on 2950/2960 series switches

Reza you're making me feel stupid lol....

VIP Super Bronze

Re: enable multicast on 2950/2960 series switches

No worries John. With so many different product lines and switch series Cisco has, some times it is confusion what devices do layer-2 and what do layer-3, what IOS works with what platforms and features set.

It is all good

Reza

27857
Views
0
Helpful
7
Replies
CreatePlease to create content