Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Webcast- Automate Nexus9k

Highlighted
Community Member

Enable Netflow on Catalyst 4500

Hi All,

I have a Catalyst 4500 L3(WS-C4507R) switch running on version 12.2(53)SG with Netflow services card WS-F4531 installed. I need it to send netflow traffic details to my WhatsUp's flowmonitor.

With reference to Whatsup's flow monitor guide

http://docs.ipswitch.com/NM/79_WhatsUp%20Gold%20v15/03_Help/index.htm?30317.htm?toc.htm

I have set the following on my switch

ip flow ingress infer-fields

ip flow-export source Looopback0

ip flow-export version 5

ip flow-export destination <whatsup server's ip address) 9999

ip route-cache flow infer-fields

1) I found that my WhatsUp's flow monitor is able to detect incoming traffic on the switch but not outgoing traffic details. Is there command to enable egress on my switch?

2) Seems that i am not able to set "ip flow ingress" and "ip flow egress" on interface level. Is there anyways it can be done rather than switch level?

Thanks

Louis

348
Views
0
Helpful
0
Replies
CreatePlease to create content