Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

enable SSH for Cisco 6509

Hi everybody,

I want to enable SSH instead of TELNET to manage the Cisco 6509 ,but i find that

the cisco 6509 don't have ssh option .

can anyone tell me the cisco 6509 support ssh or not ? IOS version is "Version 12.2(18)SXF13" .

Thanks

S3(config-line)#transport input ?

all All protocols

lat DEC LAT protocol

mop DEC MOP Remote Console Protocol

nasi NASI protocol

none No protocols

pad X.3 PAD

rlogin Unix rlogin protocol

telnet TCP/IP Telnet protocol

udptn UDPTN async via UDP protocol

3 REPLIES
Silver

Re: enable SSH for Cisco 6509

Hi,

do a show version on your box. You will see the filename which is something like s72033-ipservicesk9_wan-mz.122-18.SXF13.bin

If it has the "k9" in it, then you can use SSH because it supports encryption, if it doesn't have it, then it is not supported and you should perform a software upgrade to support it.

Pls rate if this was useful for you.

HTH,

Dario

New Member

Re: enable SSH for Cisco 6509

Hi Dario,

Thanks for you great help first .

It doessn't have the "k9" in it .

Cisco Internetwork Operating System Software

IOS (tm) s3223_rp Software (s3223_rp-IPSERVICES_WAN-M), Version 12.2(18)SXF13, R

ELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by cisco Systems, Inc.

Compiled Thu 14-Feb-08 00:07 by kellythw

Image text-base: 0x40101040, data-base: 0x42A40EB0

ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)

BOOTLDR: s3223_rp Software (s3223_rp-IPSERVICES_WAN-M), Version 12.2(18)SXF13, R

ELEASE SOFTWARE (fc1)

S3-768-10G uptime is 18 weeks, 4 days, 17 hours, 49 minutes

Time since S3-768-10G switched to active is 18 weeks, 4 days, 17 hours, 48 minut

es

System returned to ROM by power cycle (SP by power on)

System restarted at 23:34:43 PST Thu Feb 26 2009

System image file is "sup-bootdisk:s3223-ipservices_wan-mz-1.122-18.SXF13.bin"

cisco WS-C6509 (R7000) processor (revision 3.0) with 458752K/65536K bytes of mem

ory.

Processor board ID TSC0652002X

R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache

Last reset from power-on

SuperLAT software (copyright 1990 by Meridian Technology Corp).

X.25 software, Version 3.0.0.

Bridging software.

TN3270 Emulation software.

111 Virtual Ethernet/IEEE 802.3 interfaces

96 FastEthernet/IEEE 802.3 interfaces

17 Gigabit Ethernet/IEEE 802.3 interfaces

2 Ten Gigabit Ethernet/IEEE 802.3 interfaces

1915K bytes of non-volatile configuration memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x0 (will be 0x2102 at next reload)

Hall of Fame Super Bronze

Re: enable SSH for Cisco 6509

You need s3223-ipservicesk9_wan-mz.122-18.SXF13.bin

HTH,

__

Edison.

3932
Views
10
Helpful
3
Replies
CreatePlease to create content