Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Enable the High availability & redundancy between this 2 switches

 

Cisco Catalyst 3560G  Series switches x 2 Nos. & presently both switches are used independently, they wanted us to enable the High availability & redundancy between this 2 switches.

Cisco 3560G x 2 Nos.

Product ID : WS-C3560G-24TS

Version ID : V06

S/w version : 12.2(50)SE5(IPBASE)

Cisco 3560G x 2 Nos.

Product ID : WS-C3560G-24TS

Version ID : V06

S/w version : 12.2(50)SE5(IPBASE)

 

4 REPLIES
VIP Super Bronze

What do you mean by "high

What do you mean by "high availablity"?

The 3560 series is not stack able if this is what you need.

HTH

New Member

Dear Reza Sharifi,If i

Dear Reza Sharifi,

If i configure HSRP is it ok.

Are those switches doing your

Are those switches doing your intervlan routing?

If so, yes you could configure HSRP to give your LAN Subnets a level of redundancy.

 

 

Silver

Hi,You can run HSRP between

Hi,

You can run HSRP between both the 3560 switches in order to get gateway redundancy.

As 3560 switches don't support stacking, you can use clustering as an option to get HA and redundancy.

Following docs might help in clustering:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3560/software/release/12-2_52_se/configuration/guide/3560scg/swclus.html

 

http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/10585-64.html#subtopic1g

Thanks

 

"Please rate the post if found useful"

101
Views
4
Helpful
4
Replies
CreatePlease to create content