Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

enabled prompt

what causes my telnet to a 2800 router to prompt me straight away to the enabled prompt after putting my telnet password?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: enabled prompt

Celso

The most common cause of this is that the vty lines are configure with privilege level 15. Can you check this 2800 and see if its vty lines include this configuration?

HTH

Rick

2 REPLIES
Hall of Fame Super Silver

Re: enabled prompt

Celso

The most common cause of this is that the vty lines are configure with privilege level 15. Can you check this 2800 and see if its vty lines include this configuration?

HTH

Rick

Re: enabled prompt

I have seen all new ISR routers being shipped with the privilege level 15 command on the Console as well as VTY lines.

You need to remove these from you configuration to get the user prompt

HTH, rate if it does

Narayan

115
Views
4
Helpful
2
Replies
CreatePlease to create content