Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Enabling ip cef and netflow caused router crash

After enabling ip cef and netflow on 1760-VPN/K9-A router with IOS v12.3(1a) the router crashed. The router has 2 gre tunnels to the head office. Any ideas why this might have happened would be appreciated?

3 REPLIES
Hall of Fame Super Silver

Re: Enabling ip cef and netflow caused router crash

Darren

If the router crashed did it create a crashinfo file in flash? After the router comes back up the output of show version will typically have some information about the reason for the last restart and in the case of a crash will frequently reference an error code. What does the output of show version on your router show?

When a router crashes like that one of the possibilities is always a software bug. 12.3(1a) is pretty old code. It might be helpful to upgrade the code to a more recent version.

HTH

Rick

New Member

Re: Enabling ip cef and netflow caused router crash

There is a crashinfo file in flash but this is dated 20070323. Show version shows the restart due to the problem but I can't see an error code. Maybe an upgrade to the IOS is the answer.

Hall of Fame Super Silver

Re: Enabling ip cef and netflow caused router crash

Darren

It is possible that there is not a crashinfo file because the router did not create one. Perhaps there was not enough room in flash for another crashinfo file?

At any rate I would agree that an upgrade to IOS would be the logical next step.

HTH

Rick

518
Views
0
Helpful
3
Replies