Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

enabling multicast routing 3750

hi all

i am trying to enable multicasat routing on a 3750 switch

one port is configured as a routing interface with ip address

according to cisco site it should just be a case of entering 'ip multicast-routing distributed' followed by ip pim config.

unfortunately the 'ip multicast-routing' command is not available.

my switch is running ipbase-mz.122-25.SEE2

can anyone please help?

thanks in advance

4 REPLIES
Community Member

Re: enabling multicast routing 3750

Believe you might need the IP Service image to obtain multicast routing support.

Community Member

Re: enabling multicast routing 3750

Many thanks

Hall of Fame Super Bronze

Re: enabling multicast routing 3750

You need this image for multicast routing, c3750-ipservicesk9-mz.122-25.SEE2

Community Member

Re: enabling multicast routing 3750

Many thanks

777
Views
9
Helpful
4
Replies
CreatePlease to create content