Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Enabling NBAR for NAM

I have 6509 with WS-SVC-NAM-2 module. But I have difficulties to activate NBAR monitoring. My NAM Traffic Analyzer said that my software version incompatible. I have already check with Software Advisor tools, and my IOS have NBAR feature.

Here are my hardware info

IOS : s72033-adventerprisek9_wan-mz.122-18.SXF7.bin

Modules :

SFSwitch#sh module

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

1 6 Firewall Module WS-SVC-FWM-1 SADXXXXXXXX

2 8 Intrusion Detection System WS-SVC-IDSM-2 SADXXXXXXXX

3 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SADXXXXXXXX

4 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SADXXXXXXXX

5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SADXXXXXXXX

7 8 Network Analysis Module WS-SVC-NAM-2 SADXXXXXXXX

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

1 0019.2fa7.9a50 to 0019.2fa7.9a57 4.0 7.2(1) 3.1(3) Ok

2 0019.5670.df58 to 0019.5670.df5f 6.2 7.2(1) 5.0(2) Ok

3 0019.56c3.3220 to 0019.56c3.324f 2.5 12.2(14r)S5 12.2(18)SXF7 Ok

4 0019.55c5.18c0 to 0019.55c5.18ef 2.5 12.2(14r)S5 12.2(18)SXF7 Ok

5 0016.9df6.a138 to 0016.9df6.a13b 5.2 8.4(2) 12.2(18)SXF7 Ok

7 0019.561c.8082 to 0019.561c.8089 4.2 7.2(1) 3.5(1a) Ok

Mod Sub-Module Model Serial Hw Status

---- --------------------------- ------------------ ----------- ------- -------

2 IDS 2 accelerator board WS-SVC-IDSUPG SADXXXXXXXX 2.5 Ok

3 Centralized Forwarding Card WS-F6700-CFC SADXXXXXXXX 3.0 Ok

4 Centralized Forwarding Card WS-F6700-CFC SADXXXXXXXX 3.0 Ok

5 Policy Feature Card 3 WS-F6K-PFC3B SADXXXXXXXX 2.3 Ok

5 MSFC3 Daughterboard WS-SUP720 SADXXXXXXXX 2.5 Ok

Mod Online Diag Status

---- -------------------

1 Pass

2 Pass

3 Pass

4 Pass

5 Pass

7 Pass

Please help me how to activate this feature.

Thanks

Iwan

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: Enabling NBAR for NAM

Network-Based Application Recognition (NBAR) for LAN ports is supported only with Supervisor Engine 2. With a sup720, only distributed NBAR on a flexwan is supported.

2 REPLIES
Bronze

Re: Enabling NBAR for NAM

Network-Based Application Recognition (NBAR) for LAN ports is supported only with Supervisor Engine 2. With a sup720, only distributed NBAR on a flexwan is supported.

New Member

Re: Enabling NBAR for NAM

IC, thanks for your explanation

346
Views
0
Helpful
2
Replies
CreatePlease to create content