Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Enabling SSH Connection on a WS-C2960-24TC-L Switch

Hi,

I have WS-C2960-24TC-L Switch with Software Ver 12.2(25)SEE3 and imge C2960-LANBASE-M currently on it. I want to enable SSH connections on the switch and believe I need to import the cryto image onto the switch. Is this right and if so how do I go about this. The switch is now live yet.

Thank You

Shaun

3 REPLIES

Re: Enabling SSH Connection on a WS-C2960-24TC-L Switch

Shaun-

You will need a CCO account to download the image. Do you have one?

Here is the link to image, again you will need a CCO account to download.

http://download-sj.cisco.com/swc/esd/01/crypto/3DES/279963375/guest/c2960-lanbasek9-mz.122-25.SEE4.bin

Once you have it, post and we'll address the next steps.

New Member

Re: Enabling SSH Connection on a WS-C2960-24TC-L Switch

Yes, I have an account. Thanks so much

Purple

Re: Enabling SSH Connection on a WS-C2960-24TC-L Switch

Basically after you get the crypto code loaded it is as simple as the following .

Make sure box has a ip domain-name configured,if not create one.

conf t

crypto key gen rsa , hit enter

enter the key size you want to use and hit enter .

Then just add your transport input statements on your vty lines .

Verify key with the show crypto key my rsa command.

2978
Views
0
Helpful
3
Replies