Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

enabling ssh on 2960s

I need to stop telnet traffic and use SSH to my 2960s.

I see a global IP SSH version command

other then that it should be setting an IP Domiain Name, Crypto Key generate and setting the input on the VTY.

Am I forgetting anything?

Thanks,

Andy

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: enabling ssh on 2960s

Andy

Sounds about right except that you need to either

1) Create a username/password on the switch for ssh access

or

2) use an ACS server to authenticate the user.

You cannot use the line password for ssh.

Have a look at this link for further reference.

http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtml

Jon

2 REPLIES
Hall of Fame Super Blue

Re: enabling ssh on 2960s

Andy

Sounds about right except that you need to either

1) Create a username/password on the switch for ssh access

or

2) use an ACS server to authenticate the user.

You cannot use the line password for ssh.

Have a look at this link for further reference.

http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtml

Jon

Hall of Fame Super Bronze

Re: enabling ssh on 2960s

That should pretty much cover everything you need to do.

HTH,

__

Edison.

2861
Views
0
Helpful
2
Replies
CreatePlease to create content