Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Energywise Port Power

I had a configuration example that I lost on how to power up and power down ports at specific times of day. I have misplaced it and wondered if anyone could share one to get me going again.

 

Example:

 

I have a PoE telephones connected to ports GigabitEthernet1/0/1 - GigabitEthernet1/0/5.  I want to turn the power on to those ports at 5 AM and turn the power off to those ports at 9PM. 

 

Thank you in advance for your help.

 

1 REPLY
Hall of Fame Super Gold

! Global

!  Global
energywise domain [NAME] security shared-secret [PASSWORD]
energywise importance 60

!  Interface
interface range GigabitEthernet0/1 - 5
 energywise level 10 recurrence importance 70 time-range POWER_ON
 energywise level  0 recurrence importance 70 time-range TURN_OFF
 energywise importance 60

!  Time Range
time-range POWER_ON
 absolute start 00:00 01 January 2014
 periodic weekday 5:00 to 19:00


time-range TURN_OFF
 absolute start 00:00 01 January 2014
 periodic weekday 19:0 to 23:59
 periodic weekday 0:0 to 5:00

Basically, this turns ON the ports from 5 am to 9 pm, Mondays to Fridays.  During the ENTIRE weekend, the ports are powered off (hence, there's no mention of "weekend" in the TURN_OFF section).

 

Hope this helps.

 

Please rate helpful post and Cisco Support Community will donate to Kiva.

44
Views
0
Helpful
1
Replies
CreatePlease to create content