Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

EOBC interface discards & errors

Hello,

I am getting InputDiscards & outputErrors on the EOBC0/0 interface of a switch:

IF-MIB::ifDescr.142 = STRING: EOBC0/0

     IF-MIB::ifOutErrors.142 = Counter32: 355

     IF-MIB::ifInDiscards.142 = Counter32: 11666

Also i am getting InputDiscards on a SVI Interface as well:

IF-MIB::ifDescr.168 = STRING: Vlan170

     IF-MIB::ifInDiscards.168 = Counter32: 2509

show ver

Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(33)SXI8a, RELEASE SOFTWARE (fc1)

ROM: System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1)

  • Kindly advise why i am getting these discards on an EOBC interface & how to rectify it ?

  • Also what could be the reason for getting InputDiscards on a SVI interface, even though there are no errors observed in this interface ?

  • Is it possible to reset the counters (for discards, errors etc.) on a SVI interface ?

Many Thanks

Everyone's tags (3)
453
Views
0
Helpful
0
Replies
CreatePlease to create content