Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Eol or EoS for

Hi All

I have a Cat 4503 running CatOS. I have just checked the website and know that supervisor card WS-X4013 is now EoL for Cat 4000.

Is it EoL also for Cat 4503?

1 1 2 1000BaseX Supervisor WS-X4013 no ok

2 2 48 10/100/1000 Ethernet WS-X4448-GB-RJ45 no ok

3 3 48 10/100/1000 Ethernet WS-X4448-GB-RJ45 no ok

11 REPLIES

Re: Eol or EoS for

Hi

The supervisor engine is EOL independant of which chassis it is in.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps663/ps668/prod_end-of-life_notice09186a0080225602.html

Hope this helps

Martin

New Member

Re: Eol or EoS for

Is this really correct.

Looking at this link http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps5347/product_data_sheet09186a0080197424_ps4324_Products_Data_Sheet.html

shows that Cisco Catalyst 4500 Series Supervisor Engine II-Plus

(WS-X4013+) is still very much alive.

Please help.

Re: Eol or EoS for

But you stated in your original post that your enquiry regarded the WS-X4013 SUP 2. These went EOS May 2005

Regards

Martin

New Member

Re: Eol or EoS for

Thanks Martin

It shows on my show mod

1 1 2 1000BaseX Supervisor WS-X4013

Is this the same as WS-X4013 SUP 2. This is really confusing as I need to be sure I am not saying a device is EoL when it is not.

So what I have is a Cat 4503 with

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 2 1000BaseX Supervisor WS-X4013 no ok

2 2 48 10/100/1000 Ethernet WS-X4448-GB-RJ45 no ok

3 3 48 10/100/1000 Ethernet WS-X4448-GB-RJ45 no ok

Is the

1 1 2 1000BaseX Supervisor WS-X4013 end of life?

Thank for your help.

Cisco Employee

Re: Eol or EoS for

Hi Friend,

WS-X4013 is SUP 2 and WS-X4013+ is SUP2 Plus.

WS-X4013 only supports CATOS and is now EOL but SUP2+ supports IOS and is still supported on 4500 chassis.

What you have is SUP2 which is EOL.

HTH

Ankur

*Pls rate all helpfull post

New Member

Re: Eol or EoS for

Thank you

Cisco Employee

Re: Eol or EoS for

Yes, WS-X4013 is EOL/EOS and no longer available. You can replace that with the SUP2+, Sup2+10GE, Sup4/Sup5/Sup5+10GE.

http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_models_comparison.html

-amit singh

Bronze

Re: Eol or EoS for

FWIW, this is what a sh module looks like for a Sup II+ 4503

Chassis Type : WS-C4503

Power consumed by backplane : 0 Watts

Mod Ports Card Type Model Serial No.

---+-----+--------------------------------------+------------------+-----------

1 2 Supervisor II+ 1000BaseX (GBIC) WS-X4013+ JAE00000000

2 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE00000000

3 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE00000000

New Member

Re: Eol or EoS for

This is what I get on the show module on another Cat 4503 running IOS. Is this Sup or Sup II and is this EoL? It does not explicitly say Supervisor II+ like yours says.

Thanks

Mod Ports Card Type Model Serial No.

---+-----+--------------------------------------+------------------+-----------

1 2 1000BaseX (GBIC) Supervisor(active) WS-X4013+ JAE07350945

2 48 10/100/1000BaseTX (RJ45) WS-X4448-GB-RJ45 JAB080908KP

Re: Eol or EoS for

But it does say WS-X4013+ which is Sup2+. The SUP2 only runs CAT OS, wo the fact that you are running IOS is another indication you have a SUP2+ in that chassis.

Martin

New Member

Re: Eol or EoS for

Thank you. Now I can be sure of what I am saying. Thank ou very much

1103
Views
0
Helpful
11
Replies