Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

erase bootvar

friends,

look into the below info

============

BOOT variable = ,1;s3223-entservicesk9_wan-mz.122-18.SXF8.bin,1;bootdisk:s3223-e

ntservicesk9_wan-mz.122-18.SXF8.bin,1;bootdisk:s3223-entservicesk9_wan-mz.122-18

.SXF8.bin,1;

CONFIG_FILE variable =

BOOTLDR variable does not exist

Configuration register is 0x2102

=========

what does this "BOOT variable = ,1" refer to, how to clear this boot var statement. i need to point it to single image followed by 1.

i want the output to be configured as

MSFC(boot)# show boot

BOOT variable = s3223-entservicesk9_wan-mz.122-18.SXF8.bin,1

CONFIG_FILE variable does not exist

BOOTLDR variable = bootflash:s3223-entservicesk9_wan-mz.122-18.SXF8.bin

Configuration register is 0x2102

kindly guide me

3 REPLIES
Hall of Fame Super Bronze

Re: erase bootvar

It's all part of the boot system command. Please refer to the documentation:

http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_a1.html#wp1015403

HTH,

__

Edison.

Re: erase bootvar

"BOOT variable = ,1" refer to command "boot system flash".

Type "sh run | i boot system" to see what boot statement in the current config. And then remove unused boot command. Then "wr mem" and check "show boot" again.

New Member

Re: erase bootvar

In your case remove the existing boot system commands and try the following one.

boot system flash:s3223-entservicesk9_wan-mz.122-18.SXF8.bin

boot system bootldr bootflash:s3223-entservicesk9_wan-mz.122-18.SXF8.bin

I assumed that the bootloader you mentioned in the output is correct.

Hope to help

Ullas

2980
Views
10
Helpful
3
Replies
CreatePlease login to create content