Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Erase Nvram via Rommon in Cat6506

Hi team, i need to know how erase the configuration file via rommon in catalyst 6509. I change the configuration register to 0x2142 but the router back to load a configuration file.

Thanks

3 REPLIES

Re: Erase Nvram via Rommon in Cat6506

Hi,

You should set the config-register of the MSFC not the supervisor, use one of the following links according to if you are running Native or Hybrid:

Hybrid:

http://www.cisco.com/en/US/products/hw/switches/ps700/products_password_recovery09186a0080135657.shtml

Native:

http://www.cisco.com/en/US/products/hw/switches/ps700/products_password_recovery09186a0080133fb1.shtml

HTH, please do rate all helpful replies,

Mohammed Mahmoud.

Community Member

Re: Erase Nvram via Rommon in Cat6506

Catalyst have a Sup720.

Re: Erase Nvram via Rommon in Cat6506

Hi,

The documents applies to the Supervisor 1, Supervisor 2, or Supervisor 720-based systems.

The difference between both, is whether you are running CatOS (Hybrid), or pure IOS (Native).

HTH, please do rate all helpful replies,

Mohammed Mahmoud.

1469
Views
0
Helpful
3
Replies
CreatePlease to create content