Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

erasing configuration from 6500

can any one help me to delet the startup and running configuration from the 6500 my switch is using cat os. i also want to know how can i get the various memory detail like amount of RAM FLASH and also about other supervisior engine?

dporter

2 REPLIES
Purple

Re: erasing configuration from 6500

If it strictly catos isuue the "clear config all" command . If it has a msfc card just log into the msfc and do a "write erase" command and reload the card . Use the show version " and the dir bootflash: command to get the flash sizes . If it has a pcmcia card do a dir slot0: or a dir disk0:

Cisco Employee

Re: erasing configuration from 6500

Hi,

All you need to do to clear everything is

do a clear config all on the CatOS, if you have a MSFC do a wr er (write erase).

When doing the MSFC3, you do the write erase, and will have to issue a reload. It will ask

you to save your config, and just type No, or "N".

Use the sho verion to get the other information you need, check below:

Console> show version

WS-C6009 Software, Version NmpSW: 6.2(0.11)KEY

Copyright (c) 1995-2000 by Cisco Systems

NMP S/W compiled on Oct 5 2000, 01:18:33

System Bootstrap Version: 5.2(1)

Hardware Version: 1.0 Model: WS-C6009 Serial #: SCA030900JA

Mod Port Model Serial # Versions

--- ---- ------------------- ----------- --------------------------------------

1 2 WS-X6K-SUP1A-2GE SAD03392376 Hw : 1.0

Fw : 5.2(1)

Fw1: 5.1(1)CSX

Sw : 6.2(0.11)KEY

Sw1: 6.2(0.11)KEY

L3 Switching Engine SAD03365068 Hw: 1.0

3 2 WS-X6380-NAM JAB0343055Y Hw : 0.201

Fw : 4B4LZ0XA

Fw1: 4.2(0.24)DAY68

Sw : 1.1(0.20)

Sw1: 6.2(0.11)KEY

5 48 WS-X6248-RJ-45 SAD03181291 Hw : 1.0

Fw : 4.2(0.24)VAI78

Sw : 6.2(0.11)KEY

15 1 WS-F6K-MSFC SAD03366264 Hw : 1.2

Fw : 12.1(2)E,

Sw : 12.1(2)E,

DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 65408K 45402K 20006K 16384K 8683K 7701K 512K 253K 259K

Uptime is 1 day, 19 hours, 54 minutes

Console> (enable)

........................................

More information at: http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_5/cmd_ref/sh_u_v.htm

Hope it helps,

Franco Zamora

1626
Views
0
Helpful
2
Replies