Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Err-disabled mode on switch

Greetings! I have a question that I hope someone is able to accurately answer. The question is:

What colour does the LED go when a Cisco switch 2950 goes into Err-disabled mode?

Thank you in advance for all your help.

Kind regards,

Ashraf.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Err-disabled mode on switch

Hello Ashraf

The port will be on orange colour when err-disabled... you can do a manual no shut to the port to bring it up.. you can find more details on err-disable feature in the following URL:

http://cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00806cd87b.shtml

Hope this helps.. all the best..

Raj

2 REPLIES

Re: Err-disabled mode on switch

Hello Ashraf

The port will be on orange colour when err-disabled... you can do a manual no shut to the port to bring it up.. you can find more details on err-disable feature in the following URL:

http://cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00806cd87b.shtml

Hope this helps.. all the best..

Raj

New Member

Re: Err-disabled mode on switch

Dear Raj,

Thank you very much for your help! I very much appreciate your kindness.

Hope all is well with you.

Kind regards,

Ashraf.

324
Views
0
Helpful
2
Replies