Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

erridisable recovery interval

hi every body!

Let say we have following configurations:

no eerdisable detect cause all.

errdisable detect cause bpduguard.

errdisable detect cause channel-misconfig.

errdisable recovery interval 10.

Will the last command set the recovery interval at 10 seconds for both causes or simply for channel-misconfig?

thanks a lot!

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: erridisable recovery interval

Sarah,

The recovery interval will apply to the BPDU guard and the channel-misconfig only. The current statements posted will attempt to recover the errdisabled state for the configured issues. The default recovery time is 300 seconds, but the "errdisable recovery interval 10" command changes it to 10 seconds for both of them. Here is an excellent guide that will explain much more.

http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00806cd87b.shtml#topicsub1

HTH,

Mark

Re: erridisable recovery interval

Hi Sarah,

It will not enable errdisable recovery for any cause because by default errdisable recovery for all causes are disabled.

So you also need to configure

errdisable recovery cause

and then the errdisable recovery interval for causes configured will be 10 seconds.

HTH

Lejoe

2 REPLIES

Re: erridisable recovery interval

Sarah,

The recovery interval will apply to the BPDU guard and the channel-misconfig only. The current statements posted will attempt to recover the errdisabled state for the configured issues. The default recovery time is 300 seconds, but the "errdisable recovery interval 10" command changes it to 10 seconds for both of them. Here is an excellent guide that will explain much more.

http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00806cd87b.shtml#topicsub1

HTH,

Mark

Re: erridisable recovery interval

Hi Sarah,

It will not enable errdisable recovery for any cause because by default errdisable recovery for all causes are disabled.

So you also need to configure

errdisable recovery cause

and then the errdisable recovery interval for causes configured will be 10 seconds.

HTH

Lejoe

176
Views
0
Helpful
2
Replies