Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

error 2940

I have in my network 2490 with version c2940-i6k2l2q4-tar.121-22.EA4. Is possible connect them via SSH but no is possible from the 2940 connect to others 2940. I get the next error...

12_FigueresSud_2940_1#ssh -l pruebas 10.133.15.20

Trying 10.133.15.20...Open

[Connection to 10.133.15.20 aborted: error status 0]

12_FigueresSud_2940_1#

2 REPLIES
Silver

Re: error 2940

The most common cause for this error is when the source device supports and is configured for SSH v.2, but the Destination device does not.

Hall of Fame Super Bronze

Re: error 2940

Did you configure the switches with SSHv2 ?

Keep in mind, while you are able to configure the switches as SSHv2 in server mode, the clients only support SSHv1.

http://www.cisco.com/en/US/docs/switches/lan/catalyst2940/software/release/12.1_22_ea7/configuration/guide/swauthen.html#wp1237227

HTH,

204
Views
5
Helpful
2
Replies