Error after image load

[lerner cisco]

Hi All,

I am facing issue while upgrading an image , what I am noticing  the total bytes of 152.2.S.tar file  is  26388480 bytes .  at switch is its showing

[OK - 26387881 bytes]  some bytes missing   the error because of incomplete image . please suggest

Switch#$/reload tftp://10.200.238.200/me360x-universalk9-tar.152-2.S.tar

Loading me360x-universalk9-tar.152-2.S.tar from 10.200.238.200 (via Vlan1): !!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!

[OK - 26387881 bytes]

Loading me360x-universalk9-tar.152-2.S.tar from 10.200.238.200 (via Vlan1): !!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!

[OK - 26387881 bytes]

Switch#

examining image...

%Tar checksum error in

%Error opening flash:update/info (No such file or directory)

ERROR: Image is not a valid IOS image archive.

Image Extraction DONE

Description:     UNIVERSAL TAR

Release:          15.2.2S

Release Date:  29/Mar/2012

File Name:       me360x-universalk9-tar.152-2.S.tar

Min Memory:  DRAM 1024 MB Flash 64 MB

Size:     25.17 MB (26388480 bytes)

MD5 Checksum: 843d7849915b408a2b3196620aaa8d84

[alessandro.s]

hi lerner,
i think you need to untar the file to obtain a .bin file before you boot your switch using it.

hope this helps.

Regards

Sent from Cisco Technical Support iPad App

[Donnie Sigrist]

If you are using a .tar file, you need to use the archive command.

for your file above, it would be:

archive download-sw /overwrite tftp://10.200.238.200/me360x-universalk9-tar.152-2.S.tar