Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Error disable snmp traps

Hi all,

I want to enable a 3550 IOS ver 12.1 to send a trap if any ports go into err disable state.

is the: "snmp-server enable traps port-security" the command I am looking for? Is there anything more granular (i.e. it sends traps only if a port is in err-disable).

Thanks in advance,

Andres

1 REPLY
Silver

Re: Error disable snmp traps

To enable SNMP notifications (traps or informs), use the snmp-server enable traps command. To disable all SNMP notifications, use the no form of this command.

snmp-server enable traps [flash [insertion | removal] | fru-ctrl |

port-security[ trap-rate trap-rate] | removal | stpx | vlancreate | vlandelete | vtp]

no snmp-server enable traps flash [insertion | removal] | fru-ctrl |

port-security[ trap-rate trap-rate] | removal | stpx | vlancreate | vlandelete | vtp]

735
Views
0
Helpful
1
Replies
CreatePlease to create content