Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Error loading IOS

Hello, a new in this forum, we have recently turned on the switch 3550-48 and shows me the following error.

Attach this, help me please

Everyone's tags (1)
3 REPLIES
Hall of Fame Super Gold

Error loading IOS

Error with Switch Core BIST test.Returns: Test Complete Low : 0x00000011, Test Complete High  : 0x000000FF Test Phase

POST: Switch Core Tests : End, Status Failed

SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!

Two things are happening here ...

1.   Your switch has a hardware failure and crashes;

2.  Everytime the switch crashes, the switch creates a "crashinfo" file.  Multiple or continuous crashes makes multiple "crashinfo" file which, in turn, fills up the flash memory of the switch.  The switch can't boot so it too crashes and attempts to create another set of "crashinfo" file.

Basically, your switch needs to be RMA-ed.  There's nothing else to be done.

New Member

Error loading IOS

Hi, thanks for reply, that mean? my switch is dead, there is nothing to do?

Help me!! Please

Cisco Employee

Error loading IOS

Does the 3550-48 meet the minimum DRAM requirements?

IP SERVICES W/O CRYPTO
c3550-ipservices-mz.122-44.SE6.bin
Release Date: 17/MAR/2009

Size: 7936.82 KB (8127303 bytes)
Minimum Memory: DRAM:64MB   Flash:16MB

Your error: Status Failed

SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!

654
Views
0
Helpful
3
Replies
CreatePlease to create content