Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Error loading (Loading ""...: permission denied)

C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)

Compiled Mon 22-Jul-02 17:18 by antonino

WS-C2950-24 starting...

Base ethernet MAC Address: 00:17:0e:ea:f2:00

Xmodem file system is available.

Initializing Flash...

flashfs[0]: 1 files, 1 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 7741440

flashfs[0]: Bytes used: 1536

flashfs[0]: Bytes available: 7739904

flashfs[0]: flashfs fsck took 4 seconds.

...done initializing flash.

Boot Sector Filesystem (bs:) installed, fsid: 3

Parameter Block Filesystem (pb:) installed, fsid: 4

Loading ""...: permission denied

Error loading ""

Interrupt within 5 seconds to abort boot process.

Boot process failed...

The system is unable to boot automatically. The BOOT

environment variable needs to be set to a bootable

image.

switch:

switch:

switch:

switch:

switch:

switch:

switch:

switch: dir flash:

Directory of flash:/

3 -rwx 7 <date> env_vars

7739904 bytes available (1536 bytes used)

switch:

Can you please give me the solution if anybody knows about it?

1 REPLY

Re: Error loading (Loading ""...: permission denied)

The switch doesn't have a valid image in the flash to boot from. Download an IOS image onto flash using xmodem function.

This link should guide you through the process.

http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml

HTH

Sundar

431
Views
0
Helpful
1
Replies
CreatePlease to create content