Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Error Logs in 6509

Feb 2 10:57:09.602 EST: %SYSTEM_CONTROLLER-SP-3-EXCESSIVE_RESET: System Controller is getting reset so frequently

Cisco Internetwork Operating System Software

IOS (tm) s222_rp Software (s222_rp-IPSERVICES_WAN-M), Version 12.2(18)SXF15a, RELEASE SOFTWARE (fc1)

Technical Support:

Copyright (c) 1986-2008 by cisco Systems, Inc.

Compiled Mon 20-Oct-08 19:20 by kellythw

Image text-base: 0x40101040, data-base: 0x42951080

ROM: System Bootstrap, Version 12.1(11r)E1, RELEASE SOFTWARE (fc1)

BOOTLDR: s222_rp Software (s222_rp-IPSERVICES_WAN-M), Version 12.2(18)SXF15a, RELEASE SOFTWARE (fc1)

HKDDCAR24 uptime is 2 years, 47 weeks, 4 days, 23 hours, 40 minutes

Time since HKDDCAR24 switched to active is 2 years, 47 weeks, 4 days, 23 hours, 38 minutes

System returned to ROM by  power cycle (SP by reload)

System restarted at 20:15:39 EST Fri Mar 6 2009

System image file is "disk0:s222-ipservices_wan-mz.122-18.SXF15a.bin"

cisco WS-C6509 (R7000) processor (revision 2.0) with 458752K/65536K bytes of memory.

Processor board ID SCA053701RJ

R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache

Last reset from power-on

SuperLAT software (copyright 1990 by Meridian Technology Corp).

X.25 software, Version 3.0.0.

Bridging software.

TN3270 Emulation software.

13 Virtual Ethernet/IEEE 802.3 interfaces

100 Gigabit Ethernet/IEEE 802.3 interfaces

381K bytes of non-volatile configuration memory.

32768K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102

Cisco Employee

Error Logs in 6509

Hi Chandra,

Parity error if seen once is usually transient. In this case it seems to be fixed by itself without reload needed. You can monitor it for a while and if not reoccured leave it without worrying. On reoccurrence I would recomend to consider SUP replacement.

To learn more about Parity Errors please check the following CCO documentations:

Hope this helps,