Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Error messages on a C3750G-12S switch (tcam and platform)

Hi everyone,

Has anyone seen these error messages and do they suggest hw failure ?

The switch stack seems to work fine except we had a crash on the problematic module (module-2) two weeks ago....we performed a hard reboot and everything wak ok. There is not a lot of customers on module 2 so no complaints...

Here are the infos (below). If you need the output of any show commands (platform, etc.), please let me know.

Thanks!

KatD

#sh ver

Cisco IOS Software, C3750 Software (C3750-IPSERVICESK9-M), Version 12.2(50)SE2, RELEASE SOFTWARE (fc2)

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Fri 15-May-09 21:29 by nachen

Image text-base: 0x00003000, data-base: 0x01D00000

Switch Ports Model              SW Version            SW Image

------ ----- -----              ----------            ----------

*    1 12    WS-C3750G-12S-D    12.2(50)SE2           C3750-IPSERVICESK9-M

     2 12    WS-C3750G-12S-D    12.2(50)SE2           C3750-IPSERVICESK9-M

     3 12    WS-C3750G-12S-D    12.2(50)SE2           C3750-IPSERVICESK9-M

07142: Aug 30 13:37:07.639: %TCAMMGR-3-MOVE_ERROR: cam entry move from index 1357 to index 727 failed (XXXXXX-2)

-Traceback= EA363C EA3D88 419148 414E38 416340 428578 A72F48 A69A18 (XXXXXX-2)

607143: Aug 30 13:37:09.316: %TCAMMGR-3-HANDLE_ERROR: cam handle 0xCA5 is invalid (XXXXXX-2)

-Traceback= EA363C EA3D88 423530 4B7468 4B948C 4AC518 4ACB1C 4B25F4 4B21D4 4A0254 A72F48 A69A18 (XXXXXX-2)

607144: Aug 30 13:37:09.316: %TCAMMGR-3-HANDLE_ERROR: cam handle 0x2EED is invalid (XXXXXX-2)

-Traceback= EA363C EA3D88 423530 4B7468 4B948C 4AC518 4ACB1C 4B25F4 4B21D4 4A0254 A72F48 A69A18 (XXXXXX-2)

607145: Aug 30 13:37:09.325: %TCAMMGR-3-HANDLE_ERROR: cam handle 0x2EBC is invalid (XXXXXX-2)

-Traceback= EA363C EA3D88 423530 4B7468 4B948C 4AC518 4ACB1C 4B25F4 4B21D4 4A0254 A72F48 A69A18 (XXXXXX-2)

607149: Aug 30 20:46:45.975: %TCAMMGR-3-INDEX_ERROR: cam value/mask index 11792 is invalid (XXXXXX-2)

-Traceback= EA363C EA3D88 423920 4B7468 4B948C 4AC518 4ACB1C 4B25F4 4B21D4 4A0254 A72F48 A69A18 (XXXXXX-2)

607150: Aug 30 22:09:06.686: %TCAMMGR-3-INDEX_ERROR: cam value/mask index 11792 is invalid (XXXXXX-2)

-Traceback= EA363C EA3D88 423920 4B7468 4B948C 4AC518 4ACB1C 4B25F4 4B21D4 4A0254 A72F48 A69A18 (XXXXXX-2)

607151: Aug 31 07:46:43.170: platform assert failure: 0: ../src-hulc/src-sasq/hftm.c: 1482: hftm_scfd_write (XXXXXX-2)

607152: Aug 31 07:46:43.170: -Traceback= 4FCCF8 416EA0 418BD0 4240CC 4B7468 4B948C 4AC518 4ACB1C 4B25F4 4B21D4 4A0254 A72F48 A   69A18 (XXXXXX-2)

607153: Aug 31 07:50:36.499: platform assert failure: 0: ../src-hulc/src-sasq/hulc_tcam.c: 1066: htd_cam_value_write32 (XXXXXX-2)

607154: Aug 31 07:50:36.499: -Traceback= 4FCCF8 6F2310 41697C 41F668 809478 4D7410 E659C E6E8C A72F48 A69A18 (XXXXXX-2)

607155: Aug 31 07:50:36.499: platform assert failure: 0: ../src-hulc/src-sasq/hulc_tcam.c: 1066: htd_cam_value_write32 (XXXXXX-2)

607156: Aug 31 07:50:36.499: -Traceback= 4FCCF8 6F2310 427880 809484 4D7410 E659C E6E8C A72F48 A69A18 (XXXXXX-2)

1 REPLY
Hall of Fame Super Gold

Re: Error messages on a C3750G-12S switch (tcam and platform)

Wrong forum, post in "LAN ans switching". You can move your posting with the Actions panel on the right.
221
Views
0
Helpful
1
Replies