Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

%Error opening nvram:/startup-config (Invalid Checksum)

2 REPLIES
Silver

Re: %Error opening nvram:/startup-config (Invalid Checksum)

Hi ,

These error messages usually indicate a hardware failure. To verify, issue the test memory command. This is an example of the command output:

Router#test memory

Test NVRAM card [y/n] ? y

Failed

Issue the write erase command and reload the router. If the issue persists, the hardware will need to be replaced.

Thanks,

Satish

Blue

Re: %Error opening nvram:/startup-config (Invalid Checksum)

652
Views
0
Helpful
2
Replies
CreatePlease to create content