Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

error router 1700

%PQUICC_ETHER-3-UNDERFLO: Unit 1, underflow error

3 REPLIES
Silver

Re: error router 1700

Hi Jamores ,

1. %PQUICC_ETHER-3-UNDERFLO: Unit [dec], underflow error

During transmission of a frame, the local buffer of the controller chip received insufficient data because the data could not be transferred to the chip fast enough to keep pace with its output rate. Normally, such a problem is temporary, depending on transient peak loads within the system.

Recommended Action: The system should recover. No action is required. If the problem recurs, it indicates a hardware error that might be related to data traffic patterns. If this is the case, copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative, and provide the representative with the gathered information.

HTH

satish

New Member

Re: error router 1700

hello. Is possible that the error must to that I have several defined ACL?

Hall of Fame Super Silver

Re: error router 1700

Javier

I have some 1700 routers that get this error message when someone telnets to the router. As far as I have been able to tell everything continues to work ok and I do not see anything wrong except for this message in the log.

HTH

Rick

1418
Views
0
Helpful
3
Replies