Hi, I hope you can help me with this. I've testing several tftp servers in my pc windows 7, and i've got the same error , the last test was using solar winds tftp server. I created a folder in C unit, to store tftp's files, the ip addresses are detected automatically once you start solarwinds. In the folder I created,
C:\TFTP-Root I have a test file "jaja.txt", and I can send it without problems to the router using tftp
But the error comes when I try to send a file to the tftp folder from the router, for example, the running-config, in the router appears an unknown error message.
In wireshark, exploring the packet, it says that is a security problem.
This error also appeared when I used tftpd32 and the tftp's windows client and in all of them, wireshark pointed out that the mistake was for the security rules. I've also tried the same using another form of the command: copy startup-config tftp://192.168.56.3/r1-confg and nothing. The firewall is deactivated, so that couldn't be the reason.
Please, I need some help, i've searched in google and there's not a reference to this issue. Thanks in advance.
It surely sounds to me like it is some issue with your PC or with its Windows 7 software, or with a firewall. It is pretty clear that it is allowing files to be read from the PC but is not allowing a write to the PC. Are you sure that there is no firewall running? If you are sure that there is no firewall then is it possible that Windows 7 has some other security policy that does not allow a write to the hard drive?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.