Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Silver

Error when Sync'ing the startup configuration to the standby

I need your help . I have 7600 seriers router which has redundant supervisor , on which if i do "write memory" i see following error messages in the Log , i have also checked nvram and found that startup config file size is 0 :

Oct 2 12:19:22.563 EDT: %PFINIT-SP-5-CONFIG_SYNC: Sync'ing the startup configuration to the standby Router

Oct 2 12:19:22.567 EDT: %PFINIT-SP-1-CONFIG_SYNC_FAIL: Sync'ing the startup configuration to the standby Router FAILED

CATORMAR1R02

CATORMAR1R02#sh startup-config

Using 45560 out of 1964024 bytes

%Error opening nvram:/startup-config (Invalid Checksum)

CATORMAR1R02#cd nvram:

CATORMAR1R02#dir

Directory of nvram:/

1918 -rw- 0 <no date> startup-config

1919 ---- 0 <no date> private-config

1920 -rw- 0 <no date> underlying-config

1 ---- 4 <no date> rf_cold_starts

2 ---- 20 <no date> persistent-data

3 -rw- 0 <no date> ifIndex-table

1964024 bytes total (1960900 bytes free)

CATORMAR1R02#

Why is this happening and how can it be resolved? Thanks in advance.

1081
Views
0
Helpful
0
Replies
CreatePlease to create content