Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

errors

Hello!

what this output does on my 6509 720:

1d01h: %PM-SP-4-LIMITS: The number of vlan-port instances on module 1 exceeded t

he recommended limit of 1800

this due to problems

10xs

3 REPLIES
Hall of Fame Super Blue

Re: errors

Ali

See the recommended action at the bottom for a fix.

%PM-4-LIMITS: The number of vlan-port instances on [chars] exceeded the recommended limit of [dec].

This message means that the total number of individual VLAN ports, counted over the module or switch, has exceeded the recommended limit. VLANs can be counted more than once; if VLAN 1 is carried on ten interfaces, it will count as ten VLAN ports. On some platforms bundling is also ignored for purposes of this count; if eight interfaces on the same module are in one bundle, and the port channel is carrying VLAN 1, it will count as eight VLAN ports. [chars] is the module name (for example, switch or the module number), and [dec] is the recommended limit.

Recommended Action: Reduce the number of trunks and VLANs configured in the module or switch as recommended in [dec]. Enter the show interfaces trunk privileged EXEC command to see the total number of trunks and VLANs.

HTH

Jon

New Member

Re: errors

hello

10xs Jon..

New Member

Re: errors

In some cases like 6500 when all vlans is up and enabled and you configured even one trunk without allowed vlans the number of instances is exceeded

just limit the allowed vlans

190
Views
5
Helpful
3
Replies
CreatePlease to create content