Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ES20+ QinQ

I can configure two protocol on phisical interface cisco 7600 with card es20+:

802.1q and 802.1ad

thanks

2 REPLIES
New Member

Re: ES20+ QinQ

Custom Ethertype feature customizes the Ethernet settings in an ES20 line card. This feature enables the user to configure ethertype with outer tag for .1Q and QinQ packets. Custom Ethertype is supported for both EVCs (802.1Q and QinQ) and QinQ routed subinterfaces. By default Cisco 7600 series router supports Ethertype 0x8100 for .1Q and Q-in-Q outer tag. You can use the Custom Ethertype feature to configure the following Ethertypes for each port for ES20 line cards:

• 0x8100 - 802.1q

• 0x9100 - Q-in-Q

• 0x9200 - Q-in-Q

• 0x88a8 - 802.1ad

http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/SRD/baldcfg.html

New Member

ES20+ QinQ

Hi guys,

Is 802.1ad supported on WS-SUP720-3BXL of 7600 router?

Thanks?

1175
Views
0
Helpful
2
Replies