Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Ether Channel and stack

Hi,

My question is: if i have two 3750 switches in stack and i want to connect other switch 3750 or 3560 using EtherChanel to this stack....is it posssile?....have someone practical experience?

Thank you.

3 REPLIES

Re: Ether Channel and stack

Yes you can create an etherchannel between two stacks. Here's a link on how to do it.

http://cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00806cb982.shtml

HTH and please rate.

New Member

Re: Ether Channel and stack

It certainly is, as long as you follow the basic configuration requirements for all etherchannels in IOS. We run multiple Gigabit Etherchannels between 3750 stacks (8 units and individual 3560 switches. Later revisions of IOS allows a 3750 to support upto 48 etherchannels but earlier code supports only 8 channels. So watch out for this. If you are looking for more technical configuration advice please advise in a reply and perhaps I can assist.

New Member

Re: Ether Channel and stack

Thank you,

for now it is not necessary technical details, but maybe later....when we win a competition :)

bye.

364
Views
0
Helpful
3
Replies